Integrated Soft Stab-Resistant Jacket
It provides reliable protection against stabs, slashes and punctures.
USD 400 / pc
Request a quote →OEM & ODM programmesSample development to specificationReplies within one business day
Softness
overcomes hardness
Flexible stab-proof, cut-resistant and ballistic apparel on our SaintFabric composite - from 0.6 kg.
Lab-tested protection
SGS puncture level 4 and cut level 5 on record for the core range.
Multi-threat coverage
Blades, spikes and blunt impact absorbed by a zero-gap composite core.
Wearable all day
From 0.6 kg and 1-2 mm, machine washable and metal-free.
- Founded
- 2011
- Flagship units sold
- 50,000+
- Production sites
- 3
What each value covers in full+
Lab-tested protection
SGS puncture level 4 and cut level 5 on record, plus EN ISO 11393 class 1 for the chainsaw line. Certificate originals shared with procurement teams on request.
Multi-threat coverage
Blades, spikes and blunt impact. Blades, needles and impact energy are absorbed by a zero-gap composite rather than deflected by a rigid plate.
Wearable all day
From 0.6 kg and 1-2 mm. Machine washable cores, no metal, no fibreglass and no steel wire, so the garment passes security screening.
Standards on record
EN 388:2018 cut / punctureNIJ 0115.00 stabGA 68-2024GA 141-2010 level II / IIIEN ISO 11393 class 1T/CNGA 88-2026BSCI & SEDEX audited
Standards as cited in our catalogues. Certificate originals shared on request.
Explore the range
Six product lines, one protection platform
Filter by garment group, then request pricing per style.
Stab Proof Jacket · 4Short Sleeve Stab Resistant Top · 2Long Sleeve Stab Resistant Top · 2Stab Resistant Vest · 5Stab Resistant Trousers · 2Stab Resistant Safety Garment · 2
Black Stab-Resistant Short Sleeve T-Shirt
Resists slashing, hacking, punctures and cuts
USD 360 / pc
Request a quote →
Sturdyarmor Concealed Cut & Stab Resistant Vest
EN 388:2016; GA 68-2024; cut level 5; stab level 4; tear level 4; abrasion level 4
USD 310 / pc
Request a quote →
High-Quality Concealed Stab-Resistant Trousers
EN 388 cut level 5; stab level 4
USD 330 / pc
Request a quote →Prices are per piece; freight is quoted per destination.
Protection levels
One platform, three levels of protection
Same flexible composite core at every level, and all three pass security screening.
Two-in-One
Cut, abrasion
- Weight
- 0.6 kg
- Thickness
- 2 mm
- Security screening
- Passes
Three-in-One
Stab, cut, abrasion
- Weight
- 0.6 kg
- Thickness
- 2 mm
- Security screening
- Passes
Four-in-One
Ballistic, stab, cut
- Weight
- 1.5 kg
- Thickness
- 6 mm
- Security screening
- Passes
Full tier specifications+
Two-in-One
- Protection
- Cut-resistant, abrasion-resistant
- Standards as stated in source catalogue
- EN388:2018 cut resistance level C · ANSI anti-cut level 3 · wear resistance level 4
- Weight
- approx. 0.6 kg (about one regular T-shirt)
- Thickness
- approx. 2 mm
- Care
- Hand wash / machine wash
- Best for
- Manufacturing plants, mineral exploration, industrial protection
Three-in-One
- Protection
- Stab-resistant, cut-resistant, abrasion-resistant
- Standards as stated in source catalogue
- EN388:2018 cut resistance level C · puncture resistance level 4 (highest) · ANSI anti-cut level 3 · wear resistance level 4
- Weight
- approx. 0.6 kg
- Thickness
- approx. 2 mm
- Care
- Hand wash / machine wash
- Best for
- Overseas business travellers, executive government protection, daily concealed wear
Four-in-One
- Protection
- Bullet-resistant, stab-resistant, cut-resistant, abrasion-resistant
- Standards as stated in source catalogue
- EN388:2018 cut resistance level C · puncture resistance level 4 (highest) · ANSI anti-cut level 3 · wear resistance level 4 · T/CNGA 88-2026 (stab strength exceeds 30 Newtons — highest, level 3) · NIJ 0101.08 level IIIA
- Weight
- approx. 1.5 kg (about two regular T-shirts)
- Thickness
- approx. 6 mm
- Care
- Hand wash / machine wash (remove the ballistic core before cleaning)
- Best for
- All-user concealed protection, high-risk duty, government and corporate security programmes
One flexible composite core, built into every style in the range.
How a panel becomes a garment
Composite core
Inside the panel
COMPOSITE CORE
The core behind the range
Moulded tiles are laid into the forming platen before pressing.
Aramid composite corefrom 0.6 kg
HOT PRESSING
Vacuum and controlled heat
Panels are pressed under vacuum and controlled heat before cutting.
Vacuum + controlled heat1-2 mm
MULTI-LAYER CUT
Cut before it is stitched
Layered aramid panels are cut on a vacuum table with a band knife.
Layered aramidBand-knife cut
FINAL INSPECTION
Checked by hand
Panels are assembled into the carrier and checked before packing.
GA 68-2019EN ISO 11393
01 / 04
Track record
Supplying units, institutions and international partners
Supply record and partnership notes as recorded in our catalogues.
Institutional supply
Equipment programmes for public security and border defence units.
Export partnerships
Signed cooperation agreements with partners in five countries.
OEM & ODM programmes
Colour, size, logo, labelling and packaging built to your specification.
Supply record detail+
Partners from the United States, Italy, Canada, Germany and Indonesia have visited and signed cooperation agreements.
Tactical briefing
Questions buyers ask first
Straight answers drawn from our catalogues.
Can your protective apparel pass airport security?+
Yes. The protective cores are built from aramid and UHMWPE only, with no metal, fibreglass or steel wire, so garments can be screened normally.
Can the garments be washed?+
Hand or machine washing is stated for the second- and third-generation products. Garments with a removable ballistic core require the core to be taken out first.
What order quantities do you work with?+
Send the quantity you are planning and we quote against it. Trial and pilot orders can be discussed alongside volume pricing, and everything is confirmed in the written quotation.
How long is production?+
Production time depends on the style, level and quantity. It is confirmed in the quotation together with the shipping method.
Which standards do you certify to?+
Published standards include EN 388:2018 for cut / puncture, NIJ 0115.00 and GA 68-2024 for stab resistance, GA 141-2010 and NIJ 0101.07 for ballistic protection, and EN ISO 11393 class 1 for chainsaw garments.
Can you produce under our own brand?+
Yes. OEM and ODM programmes cover colour, size, logo, labelling and packaging customisation, backed by a documented sampling and inspection process.
Next step
Tell us your risk scenario. We will tell you which tier fits it.
Send your target styles, quantities and destination market. Account managers reply with pricing and lead time.